Mercury – Fury 4 Propeller | 14.5" Diameter x 24" Pitch | Right-Hand Rotation | 4-Blade | Stainless Steel | Polished Finish | 8M0151279

Overview

There’s a special kind of thrill when your boat jumps onto plane fast, stays level under load, and tracks clean through every turn that’s the power of the Mercury Fury 4 Propeller ( 8M0151279). It’s built for anglers and performance boaters who don’t back off when the livewells are full and the tournament pressure’s on.

This prop gives you that “in-control” feeling from the moment you hit the throttle. Smooth, strong, and balanced, it lifts heavy setups with ease and holds speed without compromise. Whether you’re running across big water or threading through the shallows at dawn, the Fury 4 gives you the speed and handling you can count on when it matters most.

Key Features

• Diameter & Pitch: 14.5" Diameter x 24" Pitch
• Rotation: Right-Hand
• Blade Count: 4-Blade
• Material: Mercury X7 Stainless Steel Alloy (30% stronger than standard stainless)
• Finish: Polished
• Hub System: Compatible with Mercury Flo-Torq SSR Solid Hub Kit (1-inch shaft) or SSR HD Hub Kit (1.25-inch shaft) – sold separately
• Design Details: Four-blade geometry delivers extra lift and grip for heavy tournament loads; includes Mercury’s Performance Vent System (PVS) for customizable acceleration and hole shot tuning

Engine & Boat Compatibility

• Fits Mercury and Mariner 135–350 HP TwoStroke and FourStroke outboards (1978 and newer, excluding V10 models)
• Compatible with Mercury 90–115 HP Command Thrust outboards
• Ideal for tournament bass boats, flats boats, and light bay boats
• A favorite among anglers running full livewells, heavy batteries, and large fuel loads

Performance Benefits

The Mercury Fury 4 Propeller turns load into lift and power into precision. It’s designed to handle the added weight of gear, passengers, and tournament setups without losing speed or control. The four-blade design grabs the water with confidence, delivering impressive grip during acceleration and rock-solid stability once you’re up and running.

You’ll feel it right away — a crisp, clean launch that pushes your boat onto plane with less bow rise and more control. The Fury 4’s additional blade area increases surface contact, providing a smoother transition through turns and helping the boat hold tight when the water gets rough. Even when trimmed high or crossing chop, it maintains steady traction and consistent lift.

Mercury’s X7 stainless-steel alloy makes a real difference here. It’s stronger and more resilient than conventional stainless, meaning the prop won’t flex under high load or lose its edge after long runs. That translates to more consistent performance and long-term reliability — season after season.

The Performance Vent System (PVS) gives you fine control over how your prop responds. By swapping vent plugs, you can adjust your hole shot and acceleration depending on your load or conditions — faster launches when you’re running light, or smoother power delivery when you’re heavy. It’s customizable, dependable, and ready for whatever the day throws at you.

Why is this prop is a strong choice vs. alternatives?

If your boat spends its time loaded down and still needs to perform like it’s light and fast, the Mercury Fury 4 is the prop you’ve been waiting for. It’s built to give you the edge in real-world conditions — where weight, wind, and water can make or break your run.

What sets it apart is balance. It delivers the lift and grip you need to stay on top of the water, without sacrificing speed or agility. The Fury 4 offers smoother turns, more stable handling, and a stronger bite through the chop than many three-blade designs. It’s that rare mix of muscle and finesse that helps you run hard without feeling out of control.

Because it’s an OEM Mercury propeller, you’re getting engineering that matches your outboard perfectly — tested, tuned, and proven by Mercury’s own experts. It’s a performance upgrade you’ll feel immediately, whether you’re fishing competitively or just want your boat to respond better and run cleaner.

If you demand speed, lift, and control under load, the Fury 4 (Part Number 8M0151279) delivers it all — smooth, strong, and ready to perform every time you turn the key.

FAQ Section

Q1: Which Mercury engines does the Fury 4 fit?

It fits Mercury and Mariner 135–350 HP TwoStroke and FourStroke outboards (excluding V10 models) and 90–115 HP Command Thrust outboards.

Q2: What makes this propeller different from other Mercury options?

The Fury 4’s four-blade design offers extra lift and grip, especially when the boat is fully loaded — outperforming the three-blade Fury in stability and holeshot.

Q3: How do I know if this pitch or size is right for my boat?

If your boat feels sluggish under load or you’re carrying heavy gear and want stronger lift with smooth control, the 14.5" x 24" pitch is a great fit.

Q4: Can this prop be used in both saltwater and freshwater?

Yes. The corrosion-resistant X7 stainless steel ensures consistent performance and durability in any environment.

Q5: What hub system does it use?

It’s designed to pair with Mercury’s Flo-Torq SSR or SSR HD hub kits (sold separately) for smooth shifting, quiet operation, and vibration-free performance.