Mercury Marine SmartCraft Gauges & Monitoring Systems

Mercury SmartCraft® Gauges & Displays: Complete Guide to Features and Compatibility

Mercury SmartCraft® Gauges are built to give boaters real-time insight into what’s happening under the hood—or in this case, under the water. These systems aren’t just add-ons; they’re essential tools if you want full control over your engine’s performance.

If you’re running a Mercury/Mariner OptiMax outboard from 2000 or newer—or a MerCruiser 8.1L from 2001 onward—you’re in luck. That’s the baseline for SmartCraft compatibility. Anything older likely won’t be a match, so it’s good to double-check before jumping in.

Now, let’s talk about SmartCraft Connect. This handy piece of tech bridges the gap between your engine and your multi-function display. If you're using Garmin or Raymarine systems, SmartCraft Connect turns them into more than just navigation screens. You’ll see everything from RPM and fuel flow to trim and engine temp—all in one place.

And then there’s the MercMonitor. This display slides right into the standard SC1000 gauge slot (85mm) and gives you live data on:

• Temperature, oil, battery voltage
• Water and fuel pressure
• Depth readings (with compatible transducers)
• Trim, fuel range, RPMs, and engine hours

Some versions even support Smart Tow, letting you fine-tune launch profiles for water sports—great if you’re into wake surfing or skiing.

You’ll also get NMEA 2000 support depending on your setup, which is perfect for sending engine data to other marine electronics on your network. The MercMonitor even works with Mercury System Link gauges, so everything talks to everything.

Whether you're running a single engine or multiple, the SmartCraft system puts important diagnostics right in front of you. It’s about smarter decisions on the water—no guessing, no surprises.

Frequently Asked Questions

What does Mercury SmartCraft do?

It provides live engine data like RPM, temperature, fuel flow, trim, and battery voltage—shown on your marine display or MercMonitor.

Is SmartCraft compatible with Garmin or Raymarine?

Yes, SmartCraft Connect integrates with both, so you can view engine diagnostics on your existing display.